Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

A Tale of Woad : small scale dyeing tutorial


I planted woad in my garden a few years ago. 
It's a scruffy plant, not much to look at.


     Maybe it's my imagination,
but it seems that the leaves
already have a blueish tint.

And if you pinch a leaf, a little blue bruise appears.
needs a plant marker saying  "I AM NOT A Weed"


Woad, used in tapestries and textiles in centuries past, 
is a rare source of indigo dye that can be grown this far north.
The dye process can be (ahem) unpleasant, involving 
certain bodily fluids (or chemicals), and strange odors**
...but the color lasts for centuries!!


In the old tapestries,woad blue wool 
was often overdyed
with yellow dye (from weld plants)
to make: Green. 

As the years passed, the yellow has faded,

and some lovely ladies,
flowers,
and unicorns
have been left standing
in fields of Blue.

When I first started playing with natural dyes back in the 1990's, 
I quickly tired of tans, golds and yellows. 

I tried a recipe for 'copper penny blue'
but alas, it was not lightfast. 
Decades later, my blue yarn 
has faded completely
back to white:
crewel yarn dyed with dyers coreopsis, mullein and copper pennies

Before aniline dyes were developed, if you wanted a lightfast blue, 
you had to use imported indigo or extract the indigo from woad. 
Woad contains the same dye chemical, just at a lesser concentration.

So a few years ago, I revisited natural dyeing, 
and out of curiosity,  I grew some woad here in Maine. 
My first dyeing attempt yielded 
a still-white silk scarf, unchanged 
but for a barest whisper 
of grey-blue.  : (

The second year, I got a definite grey-blue; 
took lots of notes and 
saved seeds for another try.
Woad dyed silk scarf & mill-spun Shetland wool


Last year, following the same procedure, the blue was bluer
 but I have no idea why. 
The joy of natural dyeing!
Woad dyed handspun Shetland singles & mill-spun 2 ply
handspun Shetland crewel yarns: blue (woad), natural moorit brown, moorit/white blend; on linen

Small Scale Dyeing with Woad:

You will need:
-first year woad plants (second year it goes to seed)
-Dyeing pots/utensils (not used for food ever again)
-RIT color remover (fresh) (craft store)
-Washing soda (the Woolery or Dharma trading)
-paper towels, paper plates, colander
-wool


1. Pick leaves. Tear them up and toss into a bowl. 
( I used leaves from 5 small plants (~8 oz) on ~2 ounces of fiber, a 4:1 ratio plant:fiber when I got grey blue; I used only 3 plants and a 2:1 ratio when I got the bluer blue! Go figure. Or maybe not. )

Pour boiling water over the leaves (just enough to cover).  Let steep as it cools for about 1 hour.


2. Strain off the cooled liquid into your dye pot. Squeeze out the leaves to get every last drop. The liquid will be a dark color, possibly a little blueish, but if it's just brown or green don't worry.

3. Cool completely to lukewarm (120 degrees F).
Stir in 1 1/2 T washing soda, enough to make the liquid turn greenish brown.
Greenish liquid on spatula. Using white utensils & containers really helps!


4. Aerate the liquid by pouring back and forth between 2 containers. I used 2 quart-sized yogurt cups.
Make sure you are getting BLUE Froth. Add more washing soda if needed.

Aerating (adding oxygen into the liquid)
we have Blue Froth!!
5. Pour your liquid back into the pot and reheat until just warm to the touch (~120 degrees F). Sprinkle 1 tsp Sodium Hydrosulfite (RIT color remover) over the liquid.
Avoid making any bubbles from this point on!

6. Remove pot from heat, let stand 1 hour.  Meanwhile, presoak your fiber in warm water.

7. Add fiber, gently. Let stand quietly for about 20 minutes. (no bubbles!!) The fiber will look green in the pot.

8. Time for the Magic to Happen: Remove fiber gently and lay it on a paper plate. Leave exposed to the air for at least 20 minutes. The green fiber will magically convert to BLUE as you pull it out of the pot Before Your Very Eyes!! Enjoy!
Green fiber in the pot, turning Blue on the plate!
              9. Wash and rinse your fiber as usual.

You can cover your dyepot 
And keep it overnight 
for more dyeing tomorrow....
BUT 
you won't WANT to 
cuz it smells like 
**OLD CIGARS!!šŸ˜






Aug 10 Wool Applique Tutorial 2


I designed this little wool applique door knob hanger last year.

I have made 3 of them so far, and the pattern is available in my Etsy shop. 

Instant download from my Etsy shop

This pattern has chain stitch embroidery for the vine, so you have to transfer the pattern onto black wool. Since you can't shine a light through the black fabric (well, you can try...), you can't just trace with a marker. Tissue paper to the rescue!! This is an old technique, and less messy than pouncing technique (don't even go there!). 

Here's the way I did mine:

1. Trace design onto tissue paper. You only need to trace the parts that will be embroidered.
2. Trim off excess paper. 
3. Pin the tissue paper to the fabric, making sure it's centered.
4. Knot your thread, and stitch over the drawn line with ordinary sewing thread. 
       Color should be a reasonable match to your embroidery thread.

Stitch right through both the paper and fabric.


just do a basic running stitch, and tie it off as usual.

5. Carefully tear off the paper, pulling to the side, not straight up. 


6. Now you are ready to embroider. The chain stitch Perle cotton will easily cover up the green sewing thread. 


I hope this is helpful to you. If you have other favorite ways to transfer designs onto dark fabric, feel free to comment. Maybe pouncing isn't as messy as it sounds!

Happy stitching! 
-Sue

Aug 7 Wool Applique Tutorial 1

Preparing your project

This is how I cut out wool pieces for appliquƩ. For this demonstration, I was making small round ornaments or coasters.

Background pieces: freezer paper method:

Freezer paper allows you to trace and cut an exact shape (here we are just doing a circle) and the paper also supports the wool nicely while you're cutting, so you get a cleaner cut.

1. Draw your background shape onto the smooth side of the freezer paper, using pencil. 

I used a cashew can lid as a template...and had a snack too.
2. Cut roughly around the shape, leaving a small margin that will be cut off later. 
3. Lay paper on the wool, waxy side down. 
4. Press to adhere the paper to the wool. 
about 5-10 seconds with the iron should make it stick on
 5. With sharp scissors cut out the shape exactly on the drawn line. Remove paper.
and have a few more cashews....

I also cut out the backing pieces at the same time.

 Small design pieces: Fusible web method:

Fusible web allows you to trace and cleanly cut your wool pieces, and you can then position and bond them in place. I usually use Heat n Bond light, which is light enough to stitch through easily. 

The alternative would be to cut out with freezer paper and then pin or glue everything in place. I find that fusible web gives better results, especially with small pieces. The fusible web protects the wool from fraying and makes the project very portable.

It is important to REVERSE your image (or make sure your templates have already reversed for you)

1. Trace your (reversed) image onto the paper side of the fusible web.

use a felt pen (Sharpie fine or similar)

2. Cut out the web roughly, leaving a margin. Press the web onto the correct color of wool using your iron (follow manufacturer's instructions).
I'm making little pineapple ornaments using green and gold wool scraps.
 2. Cut out the wool exactly on the drawn lines. Peel off the paper.
peel off the paper and flip the piece over so it's shiny side down, then press
 3. Time to stick the first piece of wool onto the background! Sometimes it's important to put the pieces on in the correct order!!  For example, the green foliage must be put on before the gold pineapple fruit.
Peel off the paper, and place the wool shiny side down. Make sure the piece is exactly where you want it, then press with your iron to adhere. I gently spritz with a little water just before ironing so that it will make steam as well.


The pineapple foliage goes on first. Press to adhere. 
 4. Add additional pieces, spritz and press again. If you make a mistake, don't worry, you can usually pull the piece off (you may need to reheat it a little) and reposition it.

Add the gold piece, spritz again, press again.


all ready for stitching!

5. Time to stitch your project! Be aware that really tiny pieces will not be adhered very strongly, so you should stitch them on first. That way they won't get lost.

6. Backing piece: In this example, I cut out extra black circles (using the freezer paper method). After the appliquƩ stitching was all finished, I pinned the backing on and blanket stitched around the edges. If you wanted your piece to be a little stiffer, you could cut out your backing with fusible web.

Tutorial: How to make felted lavender soap









 I'm making some felted soaps this week so I thought I would post a tutorial so you can make your own.





What you need:

Time:  Plan for about 15 minutes to make one felted soap.

Hot water: Kitchen sink is the ideal place to do this.

Soap: I only use Yardley English lavender. It has such a beautiful smell.  You should definitely find a soap with a scent you like because you will be spending some time with it...

Wool roving,  I use only about 0.1 ounce to do 1/2 bar of soap. It's more interesting if you have 2 or more colors.
shetland moorit (brown) from our ewe Iris, and white from our wether DeNozzo

1. Cut your bars of soap, if desired.

I cut the bars in half so they fit my hands easily; I also shave off the 1 or 2 of the sharpest corners.



 2. Set up a medium sized bowl of hot water in your kitchen sink. 

Don't make it too hot, because you will be putting your hand in it! The hot water will get soapy as you work, this is what you want.


3. Lay out a small amount (about 0.1 ounce) of background color roving. 
Dry your hands completely before you touch the roving so it doesn't stick to you.
Don't use too much wool, you want just enough to cover the soap without big gaps.


 4.   Pull out  small wisps of a contrasting color, lay them on top. 

 4. Flip the roving over so your decoration is now on the BOTTOM.

5. Lay another small wisp of background color over the background, crosswise. 
 The fibers should be at about a 90 degree angle to make good felt.

6. Place your soap on the pile of roving. 


notice fibers going crosswise, also white decoration fibers are on the bottom.

 7. Gather up the roving like a little package around your soap.

8. Wrap your hand around the package keeping the fibers in place, don't let them shift. 


9. Dunk your hand into the hot water, hold for a few seconds. 

Then pull it out of the bowl, and begin to squeeze, squeeze, squeeze gently, using both hands. Don't move the soap around yet, be careful not to shift the fibers.

 10. Squeeze about 10 times, and then begin to gently Rotate the soap in your hands; and keep squeezing. 

You are squeezing the fibers together into the soap. Do Not Rub or shift the fibers!!  The wool should become full of warm soapsuds. After squeezing about 25 times, dunk again in the hot soapy water. 

11. Squeeze and gently rotate without shifting the fibers,  about 50 more times, Dunk.

Another 50 times, Dunk. Another 50 times, Dunk. Keep going. If you have any sharp corners you can press them in with your fingers after the soap has softened up.  Keep going about 10-15 minutes.

12. Finally, Polish the surface. 
When the felt is pretty tight around the soap, then you can safely rub or polish the surface with your fingertips without shifting the fibers.

13. Fulling step with cold water. 
Run some cold water over your your soap, still squeezing and polishing...Dunk again in hot water, more squeezing and polishing.

14. Final rinse, and then set aside to dry. 

 

If you are making another one, replenish about half of the hot water to your bowl before you start.

Drying: Allow 2-3 days to dry out completely if you are wrapping it as a gift. 


If it's for yourself, then put it right in your shower, it's ready to be used right away. The wool will continue to shrink around the soap as you use it. It's a great exfoliant, and helps keep soap scum off your shower.


Enjoy!!  Let me know if this was helpful to you. I think felting is a fun activity for kids if they are patient enough to stay with it. I found that it helps to have them count out the squeezes:
 "... 48, 49, 50, DUNK!"

Do you have questions, or any other ideas for felting soap? I would love to hear comments from you. 




Notes on the Story of Jacob shadow puppet show



Shadow puppets from the Story of Jacob:  the "stew" puppet and Rachel














If you have followed my Shadow Puppet Tutorials #1-#3, then you have made your Shadow Theatre and cut out your first puppet, Jacob.

Look over the script to see which parts of the story you want to perform.Take my advice, don't try to perform the whole story at once, it's waayyy too long...!

Cut out your puppets:  puppet patterns are available in my Etsy shop.
Puppets include sheep, angels, Jacob's elderly father, Isaac; his brother, Esau; more sheep, goats, the hot stew over the fire, Laban, Leah, Rachel, more angels.....   You'll need plenty of black cardstock and some extra blades.

You will also need some laminating sheets. The "stew" puppet (see photo above) definitely needs to be laminated to keep it together. You will need to laminate the flocks of animals (see picture below) and the Laban puppet  should probably be laminated to protect his walking stick. To make the angel stairway, I laminated 8 angels onto a long flight of steps. I made 2 angels each in small, medium, large and XL sizes by shrinking the template; the smallest angels go on top.  I also made the steps gradually smaller toward the top. You may need 2 puppeteers to hold that one up. If you want to make a light at the top of the stairs, someone can shine a small flashlight at the screen....

an angel for Jacob's ladder
If you have a small hole punch, it's very handy for making the spotted sheep and goats.
Just punch holes in them! ( which sounds very odd.....! ) See picture below.

You'll need colored tissue paper (and more laminating sheets) to make Joseph's colorful coat...if you decide to do that part of the story. See picture below.

And also you will need tiny brads if you want some of your puppets to have a moving arms.

I would love to hear about your adventures using puppets.  What part of the story did you perform? Did you have kids operating the puppets? Did you perform for another class? Are you using these puppets for other Bible stories as well?

-- Sue
Isaac; moving arm shadow puppet (note brad at shoulder)
Jacob's flock of spotted sheep & goats laminated together into 1 puppet.

little Joseph, Jacob's favorite son
optional pyramid scenery for last scene (no pattern for this)




Shadow Puppet Tutorial #3: Cutting out the Jacob puppet

simple Jacob puppet, non-moving arm

This tutorial will show you how to make an expressive moving-arm shadow puppet and provide a free template for making the puppet.

For this tutorial, we will make Jacob, a Bible story character.

I edited The Story of Jacob from Genesis into a shadow puppet script, you can access the script here.

For performing the show, you will eventually want to make 2 Jacobs, one facing to the right and the other facing to the left.  You can see in the script which way he needs to face for each scene.

To cut out the puppet, you can access the printable template here.

Simple puppet:  If you want to make a simple puppet with no moving parts, cut out the puppet body on the solid lines, including his hand and wrist all as one piece. You won't need to cut out the other 2 arm pieces. I use scissors on the easy parts and finish the tricky parts with an exacto blade. See my previous post for pictures of the cutting process.

Moving-arm puppet: If you want to make a moving-arm puppet, you will need 2 small brads(preferably in a dark color) from a craft supply store. Cut out the puppet body with no wrists or hands (follow the dotted line), and cut out the 2 extra arm pieces separately. Put the 2 arm pieces together at the elbow joint. See dotted lines on template.
Elbow joint: Pierce through the upper and lower arm pieces and attach the brad. Don't pierce the body with this brad!!! Make sure the elbow bends freely.
Shoulder joint: Pierce the upper arm and body pieces with the brad; attach the upper arm to the body as shown.
The smooth heads of both brads should slide on the theatre screen (facing the audience).

Either way, your finished puppet will have just 1 hand. I don't recommend trying to give him 2 hands, it  makes the puppet too complicated.


Jacob template with optional moving arm



After you are finished cutting your puppet, check the script to see which way it needs to face. You will attach drinking straws to the puppeteer side of the puppet.  Before attaching the straws, it's a good idea to protect the cardstock. You can either laminate the whole puppet,  or just put a piece of shipping tape on the puppeteer side to protect the cardstock from repeated taping and untaping. (I don't permanently attach the straws; I tape them on just for the show and then remove them again when I put the puppets away. ) After protecting the card stock, tape on the straws for your show.  See my Puppet Theatre Tutorial for pictures of this.

 I hope you have fun with this! Please let me know if you have any questions.

Shadow Puppet Tutorial #2: How to make Shadow Puppets from cardstock

One of my Bible character shadow puppets
Here's a tutorial on how to transfer the design and cut your own shadow puppets from black card stock. I have been making shadow puppet shows since 2006. These puppets will fit my table top theatre, the link to the Shadow Puppet Theatre tutorial is here.

What you will need:

-Black card stock or poster board ( I'm using Recollections 65 lb black card stock from Michael's)
-White transfer paper (carbon paper)
-Pencil
-Sharp scissors
-Xacto knife
-cutting mat 'self healing'
-template or drawing

cardstock-- this package is 25 sheets of just black. I also use lightweight poster board for very large puppets.


 Transfer paper: (white carbon paper) you can't beat this stuff. I bought this little packet for under $2 about 10 years ago and hundreds of puppets later, I'm still using the original sheets. It also comes in black for your other projects.
Notice this paper has 2 sides, the whiter side is where the carbon is.

For the cutting: Oops!! I forgot to put my sharp scissors in this picture! I will show them to you later. For shadow puppets, I do most of the long cuts with scissors, and switch to the Xacto knife as needed.

People needing magnifying glasses: you know who you are.  I'm right there with you.


Okay, here we go!

1. Lay a piece of transfer paper over your black card stock. Make sure the whiter side is DOWN, touching the card stock.  Lay your template on top of the transfer paper. Make sure the entire image fits onto the transfer paper and card stock.

Making sure the puppet's feet will fit on there!

2. Trace over all the template lines with the pencil.


3. The image will be a white line on the black card stock.




4. Time to cut! Start with scissors. Take your time with the hands; they are so important. If you are doing moving-arm puppets, the emotions and actions are shown with puppet hands, so get them right. I usually cut the hands into 'mittens' first. Then go in and trim the fingers with either scissors or blade. You will feel like you are giving a puppet manicure!
first cut of a moving-arm puppet's forearm
cut into a 'mitten', ready to cut out the fingers